VisionWorks In-Dash Wireless Rear Observation Camera Integration Kit for Select Ford and Dodge Trucks

The VisionWorks In-Dash Wireless Rear Observation Camera Integration Kit allows you to connect a camera to your factory-installed in-dash screen for viewing convenience.

If your Ford Super Duty truck (2017 - current) or Dodge Ram (2020 - current) has a 12 pin outlet above the 7-way plug and has a Sync 3 with an 8" screen, Sync 4 with a 12" screen, or Uconnect with a 8.4" or 12" screen, the truck may be a candiate for this system. (See FEATURES for more detailed compatibility requirements)

This wireless package will have everything you need to install the VisionWorks Wireless HD Camera on a "camera prepped" RV. It also comes with a universal bracket that will work on any trailer that does not have pre-wiring for a rear observation camera.

To ensure a good connection from the camera to your in-dash screen, we include a Booster Antenna to shorten the line of sight on longer RVs. This is the easiest and most affordable in-dash wireless camera system available.

Your Wireless In-Dash Integration Rear Observation Camera Kit comes with the following: * Wireless Gen 2 HD Camera with Nightvision * RV Pre-Wire Adapter & Bracket (Furrion Compatible) * Weatherproof Receiver * 12V Hardware and Universal Bracket * 15 ft. Extension Cable * Booster Antenna * Ford/Ram Factory Integration 12-pin Adaptor

CAMERA SPECIFICATIONS
* Resolution: 1080p HD Resolution
* Wireless Range: 1,000 ft. with a clear line of sight
* Lens: 2.1 mm
* Viewing angle: 120 degree
* Durability rating: IP69k
* Frame rate: 60 FPS
* Night vision: Yes, 2 XL IR LEDs
* Night vision Visibility: 35 feet
* Lowest operating temperature: -20 C or -4 F

FORD SUPER DUTY REQUIREMENTS
* 2017-2025 Model Years
* Must be equipped with Ultimate Trailer Tow System (Option 874)
* Must have Sync 3 with 8" screen or Sync 4 with 12" screen
* Compatible on XL, XLT, and Lariat trim levels with Ultimate Trailer Tow System option; Ultimate Trailer Tow System comes standard on King Ranch, Platinum, and Limited Models
* If there is no receptacle, a Ford Compatible Harness is available

RAM / MOPAR HD REQUIREMENTS
* 2020-2025 Model Years
* Must be equipped with Aux Camera Prep Package (Option Code XFQ)
* Must have UConnect System with 8.4" or 12" Screen
* Compatible on Laramie, Limited, Limited Longhorn, Lone Star, Rebel, TRX, Tradesman, and Big Horn
* A RAM compatible harness is available for certain RAM chassis
* Dealer programming may be required if not equipped from the factory