EasyStart™ 364 Soft Starter

EasyStart™ 364 Soft Starter

EasyStart™ 364 Soft Starter

Regular price $279.99
/
Shipping calculated at checkout.
  • Standard Shipping (2-5 Business Days)
  • Need Advice? Call our experts at 866-324-7915

Pairs well with

Pairs well with

EasyStart™ is a one-of-a-kind, custom-developed soft starter for single-phase A/C motors. It works to provide your A/C with the lowest possible start-up current. EasyStart is the perfect solution that allows an air conditioner or refrigeration compressor to operate on a generator, inverter, or limited utility power. You can also use an EasyStart for your air compressor or fluid pump motors. Optional Installation Kit available. The EasyStart 364 comes with the following: * EasyStart module * TechnoRV Learning Series
A/C Rating: 12K to 18K BTUs Dimensions: 7.64" x 3.58" x 2.5" Voltage: 115V
* EasyStart your A/C when boondocking or running on low power. * Run 2 air conditioners on one 30-amp power source. (Note: Each A/C requires its own EasyStart unit.) * Run 1 air conditioner with a 2000W generator. * Run your A/C with more appliances at the same time. * Has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. * The EasyStart includes a unique water-resistant and UV-protected enclosure with an integrated mounting flange. * The unit comes equipped with side-angled flag connectors to attach to the run capacitor in your installation. They work well in any limited space. If you prefer, you may clip them off in favor of your preferred connector.
Yes, but you must exercise some fairly strict power management practices since many A/Cs can consume 1700-1900W in hot weather. Also, the Honda EU2000i may not have enough power at or above 4000' altitude. (Rejetting the carburetor may extend this higher.) We have many satisfied EasyStart customers using this Honda generator with all brands of rooftop air conditioners. EasyStart starts and runs these compressors even with the generator's ECO mode turned on.
EasyStart has been tested with a few good quality inverters and has been successful in quite a few customer installations. EasyStart reduces starting current to less than twice the running current of the compressor, so EasyStart works perfectly in a well-designed system.
There are some things to have in place before you get on your roof and begin installing your EasyStart. You’ll need some small items to help with installation. We offer EasyStart's Installation Kit on our site, or you can create your own. The installation kit includes various crimp terminals for wiring in your EasyStart, 3M Double-Stick Foam tape, plastic bushing (split), extra #14 AWG wire (for pigtail from relay, if applicable), and tie wraps.
Yes, you will need a EasyStart installed on any AC unit that you want to run on less power. If you have 3 ACs, you can choose to install a EasyStart on only 2 as long as you only use those 2 units when connected to 30A power.
If you are comfortable getting on your RV roof and working with electrical wires, you should be able to install the SoftStart without professional help. TechnoRV sends a Learning Series after purchase with links to wiring diagrams for all major AC models.
You may also like
Recently viewed